Customization: | Available |
---|---|
Type: | Electronic |
Number of Switch: | Multi Control Switch |
Still deciding? Get samples of US$ 90/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Low pressure | |||||||
Cut-off value Mpa | Turn on the valueMpa | Mpa Maximum pressure difference |
Mpa Minimum pressure difference |
||||
Range |
Standard tolerance | Limit tolerance | Range |
Standard tolerance | Limit tolerance | ||
0.02 | 0.02 | 0.02 | 0.1 | 0.03 | 0.02 | 0.08 | 0.03 |
0.03 | 0.03 | 0.02 | 0.1~0.15 | 0.03 | 0.02 | 0.12 | 0.05 |
0.04 | 0.03 | 0.02 | 0.1~0.15 | 0.03 | 0.02 | 0.11 | 0.05 |
0.05~0.15 | 0.04 | 0.03 | 0.15~0.3 | 0.05 | 0.03 | 0.15 | 0.05 |
0.15~0.3 | 0.05 | 0.03 | 0.2~0.5 | 0.05 | 0.03 | 0.2 | 0.05 |
0.3~0.6 | 0.05 | 0.03 | 0.4~0.8 | 0.05 | 0.03 | 0.2 | 0.05 |
0.7~0.8 | 0.07 | 0.05 | 0.8~1.2 | 0.08 | 0.05 | 0.3 | 0.05 |
0.9~1.0 | 0.08 | 0.05 | 1.0~1.4 | 0.08 | 0.05 | 0.4 | 0.05 |
High pressure |
|||||||
Cut-off value Mpa | Turn on the valueMpa | Mpa Maximum pressure difference |
Mpa Minimum pressure difference |
||||
1.1~1.3 | 0.1 | 0.07 | 0.6~0.8 | 0.05 | 0.03 | 0.5 | 0.2 |
1.4~1.6 | 0.1 | 0.07 | 0.9~1.1 | 0.08 | 0.05 | 0.5 | 0.2 |
1.7~2.5 | 0.1 | 0.07 | 1.5~2.0 | 0.1 | 0.07 | 0.5 | 0.2 |
2.6~3.0 | 0.1 | 0.07 | 2.0~2.4 | 0.1 | 0.07 | 0.6 | 0.2 |
3.2~3.5 | 0.1 | 0.07 | 2.6~3.0 | 0.1 | 0.07 | 0.6 | 0.3 |
3.6~3.9 | 0.15 | 0.1 | 2.7~2.9 | 0.1 | 0.07 | 0.9 | 0.4 |
4.0~5.5 | 0.15 | 0.1 | 3.0~5.0 | 0.15 | 0.1 | 1 | 0.5 |
Adopt quick joint of inch pipe thread or copper pipe welded structure, easy to use, flexible to install, no need of special installation and fixation;Insert type or wire type connection mode is available for users to choose at will;Single-pole single-throw switch mode, normally open switch contact structure;
Welded sealed stainless steel pressure inductor with steel explosion-proof enclosure, safe and reliable;
It can be manufactured within the pressure range of 1305PS~2610PSI(9~18MPa) according to the user's requirements. Before leaving the factory, the pressure parameters of the product have been set according to the requirements in the factory. There is no need to set any more, so it can be used directly.
Typical contour map