Yk-01h High Pressure Controller 440psi Cut out 315psi Reset Pressure Switch

Product Description

Product Description

Select pressure value according to system pressure requirement and confirm reasonable tolerance and differential pressure

Pressure switch according to the working pressure: high pressure, low pressure, vacuum

1MPa(145PSI),

High pressure operating pressure is usually greater than 1MPa (145PSI),

1Mpa(145PSI),

Low pressure operating pressure is usually less than 1Mpa (145PSI),

0~-0.1Mpa

The working pressure of vacuum switch is 0 ~ -0.1mpa
 

Low pressure
Cut-off value Mpa			Turn on the valueMpa			Mpa Maximum pressure difference	Mpa Minimum pressure difference
Range	Standard tolerance	Limit tolerance	Range	Standard tolerance	Limit tolerance
0.02	0.02	0.02	0.1	0.03	0.02	0.08	0.03
0.03	0.03	0.02	0.1~0.15	0.03	0.02	0.12	0.05
0.04	0.03	0.02	0.1~0.15	0.03	0.02	0.11	0.05
0.05~0.15	0.04	0.03	0.15~0.3	0.05	0.03	0.15	0.05
0.15~0.3	0.05	0.03	0.2~0.5	0.05	0.03	0.2	0.05
0.3~0.6	0.05	0.03	0.4~0.8	0.05	0.03	0.2	0.05
0.7~0.8	0.07	0.05	0.8~1.2	0.08	0.05	0.3	0.05
0.9~1.0	0.08	0.05	1.0~1.4	0.08	0.05	0.4	0.05

High pressure
Cut-off value Mpa			Turn on the valueMpa			Mpa Maximum pressure difference	Mpa Minimum pressure difference
1.1~1.3	0.1	0.07	0.6~0.8	0.05	0.03	0.5	0.2
1.4~1.6	0.1	0.07	0.9~1.1	0.08	0.05	0.5	0.2
1.7~2.5	0.1	0.07	1.5~2.0	0.1	0.07	0.5	0.2
2.6~3.0	0.1	0.07	2.0~2.4	0.1	0.07	0.6	0.2
3.2~3.5	0.1	0.07	2.6~3.0	0.1	0.07	0.6	0.3
3.6~3.9	0.15	0.1	2.7~2.9	0.1	0.07	0.9	0.4
4.0~5.5	0.15	0.1	3.0~5.0	0.15	0.1	1	0.5

YK Series Single Cut Single Thrower Auto-reset Pressure Contro
 (YK-01H YK-02H YK-03H YK-01L YK-02L YK-03L
 
Product Specifications
 Adopting Eng thread quick connector(copper flare connection)or brass tube welding fitting structure, flexibly setting, easy to use and no special need for mounting and fixing
 Plugging or wiring connection designed to customers choice SPST connection, normal open or normal close structure to customers choice
 Security and reliability by adopting fusion welding stainless steel pressure inductor and full air-tight connection
 Any pressure value within 3-800 PSI(0.02-55mpacan be made based on customers' requirement
 Pre-set pressure parameter before delivery allows direct use without resetting on the customers site

Operating Principle
 The series of pressure control are made based on the theory that an inside reversible stainless steel motion diaphragm turns over when inducing certain pressure. The electric contact opens or closes with the leader when the diaphragm moves. The switch resets automatically when induced pressure reduces below rated value

 Application
 The series of pressure control are used to the high, low pressure protection of some refrigeration system like residential, commercial automobile air-conditioner and ice maker etc. It can also be used to hydraulic pressure and steam pressure control system of all kinds of air compressor, equipment or tool and agricultural machine
Product features

Adopt quick joint of inch pipe thread or copper pipe welded structure, easy to use, flexible to install, no need of special installation and fixation;Insert type or wire type connection mode is available for users to choose at will;Single-pole single-throw switch mode, normally open switch contact structure;

 

Welded sealed stainless steel pressure inductor with steel explosion-proof enclosure, safe and reliable;

 

It can be manufactured within the pressure range of 1305PS~2610PSI(9~18MPa) according to the user's requirements. Before leaving the factory, the pressure parameters of the product have been set according to the requirements in the factory. There is no need to set any more, so it can be used directly.

Typical contour map















Package and Shipping


1.FedEX / DHL / UPS / TNT for samples,Door to door service;
2.By sea for batch goods;
3.Customs specifying freight forwarders or negotiable shipping methods;
4.Delivery Time:20-25 Days for samples;30-35 Days for batch goods;
5.Payment Terms:T/T,L/C at sight,D/P etc.


FAQ
Q1. When can I get the quotation?
We usually quote within 24 hours after we get your inquiry.
If you are urgent to get the price, please send the message on skype and wechat or call us directly.

Q2. How can I get a sample to check your quality?
After price confirmed, you can requiry for samples to check quality.
If you need the samples, we will charge for the sample cost.
But the sample cost can be refundable when your quantity of first order is above the MOQ

Q3. Can you do OEM for us?
Yes, the product packing can be designed as you want.

Q4. How about MOQ?
1 pcs for carton box.

Q5. What is your main market?
Eastern Europe, Southeast Asia, South America.
 
Please feel  free to contact us if you have any question.