0-1.6MPa Ceramic Capacitor Chip Constant Pressure Water Supply Pressure Transmitter

• Customization: Available
• Type: Resonant Pressure Sensor
• Component: SemiConductor Type
• Model NO.: SH
• For: Strain Gauge Pressure Transmitter
• Output Signal Type: Digital Type
• Production Process: Normal Wirewound
• Material: Metal
• Thread Type: G
• Wiring Type: Five-Wire
• Measuring Medium: Steam
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• Number of Switch: Multi Control Switch
• Structure: Amplifier Built-in Type
• Application: Home, Commercial, Industrial, Vehicles
• Explosion-Proof Type: Flameproof
• Contact: Normally Open
• Contact Type: Type C Contact
• Detection Method: Correlation Type
• Brand: Sh
• Condition: New
• Output: Normally Open + Normally Closed - Contact Gold-PLA
• Medium Temperature: 20-85°c (-40-160°c)
• Protection Protection: IP65
• Wiring Method: Terminal Wiring
• Process Connection: Galvanized Steel/Stainless Steel
• Transport Package: Carton
• Specification: customized
• Trademark: shine
• Origin: Changzhou, Jiangsu, China
• HS Code: 8483109000
• Production Capacity: 3000000
• Package Size: 30.00cm * 50.00cm * 30.00cm
• Package Gross Weight: 10.000kg

Product Description

SH50 (Compact) Pressure Switch/Pressure Controller

Product Description

 

1. Principle and structureSH50
(exquisite) pressure switch/pressure controller with built-in piston connected to spring When the pressure changes, the spring expansion and contraction amount changes accordingly, and when the pressure reaches the set value, the preset mechanical structure will be triggered and the switch signal will be issued.

2. FeaturesSH50
(compact) pressure switch/pressure controller has a compact structure, adopts DN standard plug, convenient wiring, and has a wide measurement range. High overload capacity, high repeatability, specific normally open or normally closed contacts, gold-plated contacts, and large contact capacity. It can be used for: water and oil pressure measurement.
3. Technical parameters

Measuring range	See the table below for details
Hysteresis	10-20% setpoint (25%-35%, 1%-5% optional)
error	3% set value
output	Normally open + normally closed contact gold plated≤ DC 42V, 1A ≤DC 115V, 0.15A ≤AC 42V, 3A ≤AC 125V, 3A ≤AC 250V, 0.5A
Medium temperature	-20-85ºC
Protective protection	IP65
Wiring	Terminal wiring
material	Diaphragm: NBR piston: steel piston with NBR seal process connection: galvanized steel/stainless steel housing: engineering plastic

Product Parameters

 

Fourth, the selection table

Interface Material	Model	*High allowable pressure (bar)	Setting range (bar)	error	Fixed hysteresis	Weight (kg)
Thin-film type	SH50-02.5	25	0.2...2.5	3%	10%... 20%setpoint25 %... 35% setpoint (optional) 1%... 5% setpoint (optional)	0.1
Thin-film type	SH50-005	25	0.8...5	3%	10%... 20%setpoint25 %... 35% setpoint (optional) 1%... 5% setpoint (optional)	0.1
Thin-film type	SH50-012	25	1...12	3%	10%... 20%setpoint25 %... 35% setpoint (optional) 1%... 5% setpoint (optional)	0.1
Thin-film type	SH50-050	200	5...50	3%	10%... 20%setpoint25 %... 35% setpoint (optional) 1%... 5% setpoint (optional)	0.1
Piston type	SH50-100	200	10...100	3%	10%... 20%setpoint25 %... 35% setpoint (optional) 1%... 5% setpoint (optional)	0.1
Piston type	SH50-200	300	20...200	3%	10%... 20%setpoint25 %... 35% setpoint (optional) 1%... 5% setpoint (optional)	0.1

4. Dimensional drawing



5. Installation location
 
6. Adjustment method
: Use a screwdriver to loosen the protective cover and fix the nut to remove the protective cover and female plug (do not rotate the Hersmann connector left and right when taking it off, so as not to break the internal circuit).

 
 
Step 2: Refer to the screwdriver above to adjust the size of the pressure switch point, increase it in the clockwise direction and decrease it in the counterclockwise direction.







Package and Shipping




1.FedEX / DHL / UPS / TNT for samples,Door to door service;
2.By sea for batch goods;
3.Customs specifying freight forwarders or negotiable shipping methods;
4.Delivery Time:20-25 Days for samples;30-35 Days for batch goods;
5.Payment Terms:T/T,L/C at sight,D/P etc.





Q:HOW DO I PALCE AN ORDER?

A:

1.Please send us your drawing or sample for quotation.We'll quote you within 24 hours.

2.After you confirm the quotation, we'll make sample and sent to you along with the QC check report, material certificate and heat treatment report (if needed).

3.After the sample be confirmed.We'll start to make mass production after receive the payment.We'll send you the production schedule and update you with the processing progress and product photo.

Q:WHAT IS YOUR MOQ?

A:Normally MOQ is 1 Pc

Q:HOU MUCH IS THE SHIPPING COST TO MY COUNTRY?

A:The fright charge depends on your location, quantity, dimension and the weight of the package.


Q:WHAT IS THE PRODUCTION CYCLE?

A:It depends on production dimension, technical requirements and quantity.10-20 days is required generally.


Q:WHAT KIND OF PAYMENT TERMS DO YOU ACCPET?

A:T/T, L/C


Q:WHAT SHIPPING METHODS DO YOU USE?

A:

1.For small quantity:DHL, EMS or other express you required.

2.For large quantity:Shipping by sea or air.


Q:IF YOU MAKE POOR QUALITY GOODS, WILL YOU REFOUND?

A:We make products in strict accordance with the drawings or samples.After production our QC team will check and inspect the products carefully to ensure we're delivering qualified products.We have rich experience in serving overseas customers.So generally, this case doesn't happen.But, if the case does happen, Yes, we'll give you full refund.